Inspection and Certification of Electrical Installations

The Electrical Division is charged under the Electricity Supply Act #21 of 1996 with the inspection and certification of all electrical installations before they are connected to the national grid. This certification is done in accordance to the IEE regulations.

Assuming that the installation is completely wired, the following are steps required to facilitate the inspection and certification process:

• Collect application form from the Electrical Division, DOMLEC's office at Marigot or the Sub Treasury at Portsmouth, and fill accordingly. Return filled form to Electrical Division and pay appropriate initial fees.
• Prepare installation for inspection as described on application form.
• Inspectors visit installation and carry out inspection and tests based on IEE regulations.
• Installation passes inspection / Certificate given.
• Certificate taken to power company for connection of installation to the grid.

For more information, contact:

Electrical Division
Goodwill Road
Goodwill
Commonwealth of Dominica
Telephone: (767) 266 3747
Fax: (767) 448 1968
E-mail: electricaldivision@dominica.gov.dm

Guidelines for Development Control Officers and Draftspersons

A completed development application for planning permission in respect of new buildings and extensions should contain the following information:

1. The completed Application Form supplied by the Physical Planning Division
2. Proof of Ownership Document- This may be in the form of:
   • A copy of a Certificate of Title
   • A copy of receipt
   • Note from a solicitor confirming that application is being made for a Certificate of Title in favour of applicant possessing the land to which the plan relates.
   • Note from the owner of the land, witnessed by someone for example, the Chairman of a Village Council or a Justice of the Peace confirming that the land to which the plans relates, has been given to the applicant for development.
3. One copy of the Survey Plan of the land to which the plans relate
   *If a Survey Plan is not available then the Draftsperson must state on the plans or the sheet containing the site plan, whether or not the dimensions given on the site plan are based on measurements taken on site.
4. Plans
   • All plans must be submitted in triplicate.
   • All drawings, with the exception of the Location Plan must be drawn to scale.
5. Location Plan
   This plan does not have to be drawn to scale. Its purpose is to assist the field officers in finding the site. It should show:
   • Site in relation to easily identifiable landmark or features – eg, a bridge, ravine, street, corner, shop etc.
   • Approximate distance to nearest landmark of feature;
   • North point.
6. Site Plan
   This plan should show:
   • Distance between all survey points;
   • All existing buildings on the site and indicate which ones are to be demolished and those to be retained;
   • Front, sides and back setbacks using dimension lines;
   • Distance between the proposed building and existing buildings on the site;
   • Proposed location of septic tank/soakaway;
   • Names of adjoining property owners;
   • North point;
   • Access to site;
   • Any other relevant information/specifications.
7. Floor Plan (a)
   This plan should show:
   • Overall dimension of building in respect of each floor;
   • Width and length of all spaces using dimension lines;
   • Thickness of walls;
   • Type of material of main external walls/partitions;
   • Door swings;
   • Width of windows and length of intermediate exterior wall sections, using dimensions lines;
   • Location of columns and/or stiffeners;
   • Position of staircases;
   • Any other relevant information/specification.
8. Foundation Plan
   This plan should show:
   • Spacing of columns, if any, at centres;
   • Means of tying columns to each other;
   • Size of columns;
   • Size of column pads;
   • Size of footings;
   • Width of foundation walls;
   • Spacing of foundation walls;
   • Overall dimensions of foundation;
   • Any other relevant information/specification.
9. Elevations
   Observations of at least three (3) facades of the building.
   • Elevations of floor relative to existing and/or finished ground level;
   • Slope of land;
   • Position, height and width of windows and doors relative to floor plan(s);
   • Position and form of external steps and handrail where applicable;
   • Roof finish material;
   • Length of overhangs.
10. Roof Plan
    • Overall dimensions of roof;
    • Size, type and spacing of roof members;
    • Size and position of main beams;
    • Slope of roof sections;
    • Length of overhangs.
11. Cross Sections
    • At least one cross section through the proposed building must be provided;
    • Depth of foundation/columns;
    • Height of floors;
    • Depth of floor slabs;
    • Height of roof from plate to ridge;
    • Slope of roof;
    • Depth of beam;
    • Material and thickness of walls;
    • Roof truss system;
    • Slope of ground;
    • Any other necessary information/specification.
12. Beams Framing Plan
    • Arrangement of floor beams relative to foundation;
    • Column layout/floor plan;
    • Reinforcement plans/specification of floor slab;
13. Details
    To be taken at all critical sections of buildings.
    1. Foundation and Retaining Walls
       • Depth, thickness, width, material, arrangement, size and spacing of reinforcement in foundation wall and footings;
       • Method of tying footings to foundation wall to floor slab and wall;
       • Height of retaining wall;
       • Any other relevant information/specification.
    2. Floor Slab on Grade
       • Height of slab above ground;
       • Thickness of slab;
       • Reinforcement in slab;
       • Support of slab at point of details;
       • Thickness of blinding;
       • Damp-proofing material;
       • Thickness of hardcore;
       • Method of tying slab to wall;
       • Any other necessary information/specification.
    3. Columns
       • Size of columns;
       • Depth of pads, including thickness;
       • Size of spacing of reinforcement in column and pads.
    4. Beams
       • Depth of beam including slab thickness;
       • Size and arrangement of reinforcement at mid-spans support;
       • Cantilever section;
       • Spacing of ties.
    5. Stiffeners
       • Size;
       • Arrangement and size of reinforcements.
    6. Roof
       • Size of members;
       • Spacing of members;
       • Size of tie beams;
       • Roofing materials;
       • Method of tying roof to plate/tie-beam/walls;
       • Length of caves;
       • Ceiling material and method of support;
       • Any other necessary information/specification.
    7. Suspended Slabs
       • Slab thickness;
       • Position of beams in slab section;
       • Arrangement, size and spacing of reinforcements at mid-span, supports and cantilever section;
       • Any other necessary information/specification.
    8. Ring Beam
       • Width and depth of beam;
       • Size of reinforcement;
       • Spacing of ties.
    9. Steps
       • Number of risers and landings;
       • Height of risers;
       • Width of tread;
       • Waist thickness;
       • Size, arrangement and spacing of reinforcement;
       • Depth size of footing below grade;
       • Height, material and method of support to handrail;
       • Means of support.
14. Electricity Plan
    • Type and location of lighting fixtures and switches;
    • Location of sockets;
    • Type and location of switches to each lighting fixture;
    • Door swings;
    • Location of main switch;
    • Location of meter;
    • Any other necessary information/specification.
15. Plumbing Plan
    • Arrangement/type of fixture in washrooms and kitchen;
    • Water line to all fixtures;
    • Waste line from all fixtures;
    • Size of water line and waste lines;
    • Sources of supply;
    • Any other necessary information/specification.
16. Drainage Plan
    • Size and arrangement of soil pipes;
    • Location/size of manholes;
    • Location of septic tank if any;
    • Location of effluent disposal field/soakaway;
    • Size, type and arrangement of storm/surface water drainage channels;
    • Disposal point of storm/surface water in draining channels.
17. Special Information
    1. Septic Tank
       • Plan, section and size of septic tank, (if applicable) approved by Chief Environmental Health. Officer
    2. Soakaway
       • Type and dimensions of soakaway recommended by the Chief Environmental Health Officer, (if applicable).
    3. Engineer's Certificate
       Required for but not limited to the following:
       • Buildings which are three floors or more;
       • Change of use from residential to commercial, industrial or institutional;
       • Pre-fabricated buildings;
       • Non-conventional roof truss systems;
       • Two storey buildings with continuous spans in excess of 16 feet;
       • Two storey multi-unit residential buildings with 6 units or more;
       • Commercial, institutional, industrial or mix-use buildings with a gross floor area of 5,000 sq. ft. or more.
       (Provided that, the plans in respect of the aforementioned buildings were not prepared by a Civil or Structural Engineer.)

For more information, contact:

Physical Planning Division
Charles Avenue
Goodwill
Commonwealth of Dominica
Telephone: (767) 266 3751
Fax: (767) 448 4807
E-mail: physicalplannig@dominica.gov.dm

The lots in all the schemes are on average between 2,000 - 5,000 square feet.

For more information, contact:

Housing Division
Goodwill Road
Goodwill
Dominica
Tel: (767) 266 3740
Fax: (767) 448 7512
E-mail: housingdivision@dominica.gov.dm

1. Submit completed application form (PDF, 106 KB) to the Housing Division.
2. The clerk enters the applications in a register and also on the computer according to the Government Housing Scheme where lot is requested.
3. List of applicants together with application forms are submitted to the Houses and Lands Allocations Committee.
4. Recommendations from the Houses and Lands Allocations Committee are submitted to the Honourable Minister.
5. The Honourable Minister makes submissions to the Cabinet for approval.
6. Cabinet Decisions with approved lots are sent to the Housing Division for preparation of Allocation Letters.
7. Allocation letters are prepared and sent to the Honourable Minister for signature.
8. Signed letters are returned to the Housing Division.
9. The Division then sends the Allocation Letters to the approved applicants.
10. When requested, approved applicants are shown lots allocated to them.
11. Lots are paid for at the Housing Division and survey fees are paid at the Lands and Surveys Division.
12. Plans are requested from the Lands and Surveys Division by the Housing Division.
13. Plans received by the Housing Division are sent to solicitors or are picked up at the Housing Division by the respective individuals.
14. Individuals are asked to take their plans to a solicitor for the processing of their title; this requires a 7.5% Government Transfer Fee of the valuation of the land plus the solicitor's charges.
15. Memorandum of Transfer (MOTs) are submitted by the solicitor to the Housing Division.
16. Housing Division verifies the typed information on the Memorandum of Transfer (MOT) and ensures that all relevant documents are attached and then sends the MOTs in a batch to the Ministry of Tourism and Legal Affairs for transmission to the office His Excellency the President.
17. Signed MOTs are returned to the Housing Division through the Ministry of Tourism and Legal Affairs.
18. Housing Division then sends MOTs to the respective solicitors in order to continue the process of the Certificate of Title (COT).

Housing Division
Goodwill Road
Goodwill
Dominica
Tel: (767) 266 3740
Fax: (767) 448 7512
E-mail: housingdivision@dominica.gov.dm